Buldog - F3A
- Acromaster
- Pilote Confirmé
- Messages : 188
- Inscription : 27 sept. 2004, 21:37
- Avion : Mythos 125
- Moteur : Hacker A60
- Hélice : 19"
- Carburant : LIPO
- Emetteur : JETI DC-16
- Récepteur : JETI
- Servos : Autres
- Fréquence : 2.4GHz
- licence : AMA
- Localisation : Houston - Texas
Re: Buldog - F3A
I am very impressived ! Congratulation guys !!!
Olivier
Olivier
In Texas, everything is bigger !
- Marbar
- Apprenti pilote
- Messages : 4
- Inscription : 09 févr. 2010, 08:47
- Avion : Hypershade
- Moteur : AXI 5330/22
- Hélice : 21x14
- Fréquence : ma fréquence
Re: Buldog - F3A
Hi!
Weight of finished parts up to now: Fuselage 768g
Elevator left 62g
Elevator right 64g
Ruder 42g
Carbon Fiber landing gear 120g
Canopy is not finished yet : I expect end weight abouth 160g
Expected weight of other parts: Wings 2x 270g = 540g
Wing tube (Al) = 110g
Hood 100 g
All up weight: 1820g
Offcourse are coverring and painting not included!
Regards!
Marko
Weight of finished parts up to now: Fuselage 768g
Elevator left 62g
Elevator right 64g
Ruder 42g
Carbon Fiber landing gear 120g
Canopy is not finished yet : I expect end weight abouth 160g
Expected weight of other parts: Wings 2x 270g = 540g
Wing tube (Al) = 110g
Hood 100 g
All up weight: 1820g
Offcourse are coverring and painting not included!
Regards!
Marko
- Marbar
- Apprenti pilote
- Messages : 4
- Inscription : 09 févr. 2010, 08:47
- Avion : Hypershade
- Moteur : AXI 5330/22
- Hélice : 21x14
- Fréquence : ma fréquence
Re: Buldog - F3A
Hi, Some progress here: Finished Canopy, left and right wing, Wing tube shortened
Weights: Canopy 152g
Wing Left 253g
Wing Right 247g
Alup weight(on pictures): 1737g
More pictures on my site: http://www.e-modelar.net/clanki-39.htm
Weights: Canopy 152g
Wing Left 253g
Wing Right 247g
Alup weight(on pictures): 1737g
More pictures on my site: http://www.e-modelar.net/clanki-39.htm
- maki
- Apprenti pilote
- Messages : 16
- Inscription : 24 sept. 2008, 18:07
- Avion : Buldog - NEW!
- Moteur : Turnigy
- Hélice : 22x14
- Carburant : E-10S
- Emetteur : mc24+JETI 2.4G
- Récepteur : JETI 8 ch
- Catégorie : Promotion
- Fréquence : 2.4G
Re: Buldog - F3A
After short time out, things are going forward. Here is some photos of the wing. Construction is completley wood from 2mm balsa sheets.
some details...
completley cowered with balsa - weight 247g
and from another angle
here is almoast complete model from behind
and another...
model on this photos weight 1737g, we are expecting another 120g for motor cower.
now is my turn, to make a mold for motor cower. I hope it will bee to the end next week.
I'll keep you inform abouth progress we made.
regards, Bogdan
some details...
completley cowered with balsa - weight 247g
and from another angle
here is almoast complete model from behind
and another...
model on this photos weight 1737g, we are expecting another 120g for motor cower.
now is my turn, to make a mold for motor cower. I hope it will bee to the end next week.
I'll keep you inform abouth progress we made.
regards, Bogdan
- maki
- Apprenti pilote
- Messages : 16
- Inscription : 24 sept. 2008, 18:07
- Avion : Buldog - NEW!
- Moteur : Turnigy
- Hélice : 22x14
- Carburant : E-10S
- Emetteur : mc24+JETI 2.4G
- Récepteur : JETI 8 ch
- Catégorie : Promotion
- Fréquence : 2.4G
Re: Buldog - F3A
Hi to all,
After longer abstinence in modeling, I have made some progress mow.
I have managed new form for motor cowl and here is some newest pictures.
... some problem to upload...
After longer abstinence in modeling, I have made some progress mow.
I have managed new form for motor cowl and here is some newest pictures.
... some problem to upload...
- maki
- Apprenti pilote
- Messages : 16
- Inscription : 24 sept. 2008, 18:07
- Avion : Buldog - NEW!
- Moteur : Turnigy
- Hélice : 22x14
- Carburant : E-10S
- Emetteur : mc24+JETI 2.4G
- Récepteur : JETI 8 ch
- Catégorie : Promotion
- Fréquence : 2.4G
Re: Buldog - F3A
and the pictures says more then words
first cowl
looks good for the first one
and finaly, comparision with mvvs26
a lot of space inside...
Goal was ahived, motor cowl can take evan 50ccm motor!
!
I hope, that you enjoy this building thread. I will try to inform you with some good news from flying field.
Regards to all,
Bogdan
Bogdan
first cowl
looks good for the first one
and finaly, comparision with mvvs26
a lot of space inside...
Goal was ahived, motor cowl can take evan 50ccm motor!
!
I hope, that you enjoy this building thread. I will try to inform you with some good news from flying field.
Regards to all,
Bogdan
Bogdan
- jclaude
- Pilote Confirmé
- Messages : 176
- Inscription : 31 août 2005, 09:57
- Avion : Monolog 110 - Epower
- Moteur : 1820W
- Hélice : 17x10
- Carburant : Lipo
- Emetteur : Radiomaster TX16S
- Servos : Autres
- Fréquence : 2.4Ghz
- Localisation : Belgium
- Contact :
Re: Buldog - F3A
claudecuinet a écrit :Hello Bogdan
I saw the Buldog finished. Very nice pattern.
Please is it possible to post some pictures on this forum because I cannot uploaded pictures which are posted on your blog.
http://www.e-modelar.net/clanki-39.html
Thanks
There is a nice job, Bogdan! As Claude say, please post some pictures on our forum...
jclaude
- maki
- Apprenti pilote
- Messages : 16
- Inscription : 24 sept. 2008, 18:07
- Avion : Buldog - NEW!
- Moteur : Turnigy
- Hélice : 22x14
- Carburant : E-10S
- Emetteur : mc24+JETI 2.4G
- Récepteur : JETI 8 ch
- Catégorie : Promotion
- Fréquence : 2.4G
Re: Buldog - F3A
Hi to all,
That is colour scheme from friend Marko, also constructor of this model.
I will post pictures as soon I will have it, probably next Wednesday when Marko come back from holidays.
Regards, Bogdan
Bogdan
That is colour scheme from friend Marko, also constructor of this model.
I will post pictures as soon I will have it, probably next Wednesday when Marko come back from holidays.
Regards, Bogdan
Bogdan
- maki
- Apprenti pilote
- Messages : 16
- Inscription : 24 sept. 2008, 18:07
- Avion : Buldog - NEW!
- Moteur : Turnigy
- Hélice : 22x14
- Carburant : E-10S
- Emetteur : mc24+JETI 2.4G
- Récepteur : JETI 8 ch
- Catégorie : Promotion
- Fréquence : 2.4G
Re: Buldog - F3A
As I have promised, here are the pictures of the finished model.
I think that colour scheme is realy nice, it will be quite efective in flying for recongnition which side is at the moment wisiblle.
Abouth installed equipement I will post some more details later. For now I can say that motor is modified Turnygy, ESC will be JETI Spin 77 or 99 and 10S 4900mah Lipo.
Turnygy,
I hope that you enjoy reading my thread.
If you have anny questions or remarks, please do not hesitate to ask.
Best regards to all forum members,
Bogdan
Bogdan
I think that colour scheme is realy nice, it will be quite efective in flying for recongnition which side is at the moment wisiblle.
Abouth installed equipement I will post some more details later. For now I can say that motor is modified Turnygy, ESC will be JETI Spin 77 or 99 and 10S 4900mah Lipo.
Turnygy,
I hope that you enjoy reading my thread.
If you have anny questions or remarks, please do not hesitate to ask.
Best regards to all forum members,
Bogdan
Bogdan
Dernière modification par maki le 14 mai 2011, 21:25, modifié 1 fois.
- maki
- Apprenti pilote
- Messages : 16
- Inscription : 24 sept. 2008, 18:07
- Avion : Buldog - NEW!
- Moteur : Turnigy
- Hélice : 22x14
- Carburant : E-10S
- Emetteur : mc24+JETI 2.4G
- Récepteur : JETI 8 ch
- Catégorie : Promotion
- Fréquence : 2.4G
Re: Buldog - F3A
I didn't find the exact colour scheme yet, but it should bee something like Marko's because they are birds from the same nest
Certainly I will paint my scheme over white oracover and not making templates for diferent coloures. This method I have using for my previous models and work super! with wery litle weight added. It is also easier and faster for me.
Marko's
Maybe I will make my old Saphire scheme
old Saphire scheme
Certainly I will paint my scheme over white oracover and not making templates for diferent coloures. This method I have using for my previous models and work super! with wery litle weight added. It is also easier and faster for me.
Marko's
Maybe I will make my old Saphire scheme
old Saphire scheme
- maki
- Apprenti pilote
- Messages : 16
- Inscription : 24 sept. 2008, 18:07
- Avion : Buldog - NEW!
- Moteur : Turnigy
- Hélice : 22x14
- Carburant : E-10S
- Emetteur : mc24+JETI 2.4G
- Récepteur : JETI 8 ch
- Catégorie : Promotion
- Fréquence : 2.4G
Re: Buldog - F3A
After realy long time, I have managed to add some new pictures about our project Buldog.
Here is some pictures of my finished new model for this seson. Colour scheme is not completly populated yet, I must add some stickers to model.
Last information is, that here are building fiwe of them now, two are flying at the moment, one is on waiting list because of Lipos, other two are almoast finished.
Bogdan
Here is some pictures of my finished new model for this seson. Colour scheme is not completly populated yet, I must add some stickers to model.
Last information is, that here are building fiwe of them now, two are flying at the moment, one is on waiting list because of Lipos, other two are almoast finished.
Bogdan
Dernière modification par maki le 14 mai 2011, 21:24, modifié 1 fois.
- maki
- Apprenti pilote
- Messages : 16
- Inscription : 24 sept. 2008, 18:07
- Avion : Buldog - NEW!
- Moteur : Turnigy
- Hélice : 22x14
- Carburant : E-10S
- Emetteur : mc24+JETI 2.4G
- Récepteur : JETI 8 ch
- Catégorie : Promotion
- Fréquence : 2.4G
Re: Buldog - F3A
Dernière modification par maki le 18 mai 2011, 13:45, modifié 1 fois.
- Marbar
- Apprenti pilote
- Messages : 4
- Inscription : 09 févr. 2010, 08:47
- Avion : Hypershade
- Moteur : AXI 5330/22
- Hélice : 21x14
- Fréquence : ma fréquence
Re: Buldog - F3A
Bonjour!
Voici quelques images dans le Bulldog tiers d'avoir ans et est la propriété de l'un des meilleurs pilotes F3A en Slovénie. Il est impressionné par les propriétés létales!
http://www.e-modelar.net/galerija-26.html
Salutations!
Marko
Voici quelques images dans le Bulldog tiers d'avoir ans et est la propriété de l'un des meilleurs pilotes F3A en Slovénie. Il est impressionné par les propriétés létales!
http://www.e-modelar.net/galerija-26.html
Salutations!
Marko