AUDAX

Venez poster des news sur du matos des commerçants, ou autres
Avatar de l’utilisateur
claudecuinet
Modérateur
Modérateur
Messages : 2829
Inscription : 06 sept. 2004, 15:05
Avion : HARMONIE E
Moteur : HACKER Q80 14XS
Hélice : RS tripale 21x14
Carburant : HACKER 5000 mAh 20 C
Emetteur : FUTABA 14 SG
Servos : Autres
Catégorie : Nationale 2B
Fréquence : 2,4 Gh

AUDAX

Message non lu par claudecuinet »

Bonjour

Le dernier d'Alexandre Voicu

https://www.facebook.com/alexandru.voicu.754?fref=ts

Image
Image
Avatar de l’utilisateur
Voldos
Pilote Confirmé
Pilote Confirmé
Messages : 405
Inscription : 16 sept. 2005, 19:02
Emetteur : MC20 Hott
Récepteur : GR16 Hott
Servos : Autres
Fréquence : 2.4GHz
licence : 9906092
Localisation : Aéromodélisme Vallée de la Veyre--63730--Les Martres de Veyre
Contact :

Re: AUDAX

Message non lu par Voldos »

on voit peu d'articles sur les systèmes contra-rotatifs
Mis à part en F3P, est-ce que des compétiteurs français l'utilisent en F3A ?
Image
Avatar de l’utilisateur
claudecuinet
Modérateur
Modérateur
Messages : 2829
Inscription : 06 sept. 2004, 15:05
Avion : HARMONIE E
Moteur : HACKER Q80 14XS
Hélice : RS tripale 21x14
Carburant : HACKER 5000 mAh 20 C
Emetteur : FUTABA 14 SG
Servos : Autres
Catégorie : Nationale 2B
Fréquence : 2,4 Gh

Re: AUDAX

Message non lu par claudecuinet »

Bonjour Christian

En France, il y en a au moins un. Il a fait un championnat de France avec.
Aux US, comme le système est conçu et vendu par Brenner qui est américain; il y en beaucoup qui l'utilisent malgré le poids supplémentaire et le coût.

http://www.rcuniverse.com/forum/electri ... es-42.html

Image
Avatar de l’utilisateur
Cedric Carayon
Equipe de France F3A
Equipe de France F3A
Messages : 359
Inscription : 09 avr. 2006, 21:55
Moteur : YS 200S DZ CDI
Hélice : 21 * 10 WPNC
Carburant : YS FUEL
Servos : Futaba
Catégorie : Internationale
licence : 9503990
Localisation : Au pays du cassoulet !
Contact :

Re: AUDAX

Message non lu par Cedric Carayon »

Voldos a écrit :on voit peu d'articles sur les systèmes contra-rotatifs
Mis à part en F3P, est-ce que des compétiteurs français l'utilisent en F3A ?
Je connais un pilote inter qui vient de recevoir ce système là, et si les essais sont concluant on le verra tout au long de la saison prochaine
http://www.modelisme-smac.fr
Importateur YS - Kato - Hatori - Tettra - Nishioka - Asano
Marque Française : LABEMA


http://cc-f3a.blogspot.fr
nonoleptitrobot
Champion de France 2011 Nat B
Messages : 190
Inscription : 08 nov. 2007, 13:36
Avion : PEGASE II
Moteur : OS 61RF
Hélice : ?x?
Emetteur : FF9
Récepteur : futaba
Servos : Futaba
Fréquence : 41.000
licence : 0801314
Localisation : Rennes

Re: AUDAX

Message non lu par nonoleptitrobot »

Cedric Carayon a écrit :
Voldos a écrit :on voit peu d'articles sur les systèmes contra-rotatifs
Mis à part en F3P, est-ce que des compétiteurs français l'utilisent en F3A ?
Je connais un pilote inter qui vient de recevoir ce système là, et si les essais sont concluant on le verra tout au long de la saison prochaine

Peux -t-on avoir ses initiales ?!
Avatar de l’utilisateur
Roland
Pilote Confirmé
Pilote Confirmé
Messages : 366
Inscription : 05 sept. 2004, 22:10

Re: AUDAX

Message non lu par Roland »

JCLH
Bloodhound
Pilote Confirmé
Pilote Confirmé
Messages : 112
Inscription : 09 août 2008, 15:33

Re: AUDAX

Message non lu par Bloodhound »

Thank you Claude for starting the Audax thread. It's been a while, but we made some progress on the model so i will post some updates here.

The model will be full composite, so this means we had to manufacture molds for fuselage,canopy,wings, stabs and rudder. All the mold plugs were machined on a CNC router, here are a few pictures of the stab mold plugs during machining process:

Image Image Image Image Image Image
Bloodhound
Pilote Confirmé
Pilote Confirmé
Messages : 112
Inscription : 09 août 2008, 15:33

Re: AUDAX

Message non lu par Bloodhound »

Pictures of the finished stab molds:

Image Image Image Image
Bloodhound
Pilote Confirmé
Pilote Confirmé
Messages : 112
Inscription : 09 août 2008, 15:33

Re: AUDAX

Message non lu par Bloodhound »

The stab layup consists of a sheet of 1.2mm Airex as core material, sandwiched between 2 layers of 25g/m2 fiberglass. The internal structure looks like this:

Image Image Image Image

It's maybe a little stronger than needed, so it will be simplified in the future to make it lighter.
Bloodhound
Pilote Confirmé
Pilote Confirmé
Messages : 112
Inscription : 09 août 2008, 15:33

Re: AUDAX

Message non lu par Bloodhound »

CNC machining the wing mold plugs:

Image Image Image Image Image Image Image Image Image Image Image
Bloodhound
Pilote Confirmé
Pilote Confirmé
Messages : 112
Inscription : 09 août 2008, 15:33

Re: AUDAX

Message non lu par Bloodhound »

Finished wing mold:

Image Image Image Image
Bloodhound
Pilote Confirmé
Pilote Confirmé
Messages : 112
Inscription : 09 août 2008, 15:33

Re: AUDAX

Message non lu par Bloodhound »

We built a few composite fuselages in the past but composite wings are a new experience for us. We only found very limited online material about this subject, so the only way to get it right was to build a pair of wings, see what comes out and adjust the manufacturing process accordingly.

The composite skins are made of 2mm Airex sandwiched between 2 layers of 50g/m2 fiberglass, with a strip of peel ply for the hinge line. Everything was vacuum bagged and put in the oven for curing at 60 deg C.

All the parts for the internal structure were laser cut; we used 3mm liteply for the ribs supporting the wingtube and 6mm balsa for the main spar. These parts were considered critical so they were carbon laminated, which added quite a bit of weight. We also added a few strips of unidirectional carbon between the main spar and the wing skins. All the other parts were made of 2.5mm balsa.

The internal structure alone was 140g, which made it clear from the start that this pair of wings were going to be heavy, but we decided to build them anyway and use them for testing.

A few images of the wing internal structure:

Image Image Image
Avatar de l’utilisateur
jclaude
Pilote Confirmé
Pilote Confirmé
Messages : 176
Inscription : 31 août 2005, 09:57
Avion : Monolog 110 - Epower
Moteur : 1820W
Hélice : 17x10
Carburant : Lipo
Emetteur : Radiomaster TX16S
Servos : Autres
Fréquence : 2.4Ghz
Localisation : Belgium
Contact :

Re: AUDAX

Message non lu par jclaude »

Waouh! Very interesting subject!

I'm not a great fan of full composite structure, but, I'm very interested to follow, and learn, the latest technology.

Regards.
jclaude
Avatar de l’utilisateur
fabien drouet
Chef des boulets
Messages : 790
Inscription : 06 août 2005, 19:22
Avion : XARELTOO
Moteur : HACKER Q80 13XS SPEC
Hélice : 20x13
Emetteur : T12FG
Récepteur : FUTABA
Servos : Futaba
Catégorie : Nationale 2B
Fréquence : 2.4Ghz
licence : 0508863
Localisation : 91

Re: AUDAX

Message non lu par fabien drouet »

Par curiosité, pourquoi cet a priori sur le full composite ?
XARELTOO
20X13 PT MODEL
Futaba T12FG 2.4Ghz
OXgwePew
N° licence: 0508863 - AD
N° CLUB: 0004 - 329 (St FARGEAU PONTHIERRY)
Bloodhound
Pilote Confirmé
Pilote Confirmé
Messages : 112
Inscription : 09 août 2008, 15:33

Re: AUDAX

Message non lu par Bloodhound »

Fabien,

The foam and balsa wings have the advantage of being very light, but because of the hot wire cutting technique for the wing core, as a designer you are limited to a polygonal shape for the wing. Since i wanted my wings to have curved tips, i had to choose between built-up, balsa structure wings or composite construction wings. At that time i was quite busy with traning and contests so i had no time for designing a balsa structure wing; i also had a good offer from a friend for CNC cutting the mold plugs so i thought why not...

The stabs came out at 104g which is a pretty good weight for composite construction. As expected, wings are quite heavy (~496g) but i can use them for flight testing and we have plenty of ideas where we can save weight, so i'm sure we can achieve the target weight with the next pair of wings. The elevator is already cut and the peel-ply hinge seems very good.

Image Image Image
Répondre