Plaquette équilibrage Cell pro 10S

Déposer ici les bons tuyaux, vos petites annonces(achat/vente)
nonoleptitrobot
Champion de France 2011 Nat B
Messages : 191
Inscription : 08 nov. 2007, 13:36
Avion : PEGASE II
Moteur : OS 61RF
Hélice : ?x?
Emetteur : FF9
Récepteur : futaba
Servos : Futaba
Fréquence : 41.000
licence : 0801314
Localisation : Rennes

Plaquette équilibrage Cell pro 10S

Message non lu par nonoleptitrobot »

Bonjour à tous,

Je recherche une plaquette d'équilibrage pour Cell Pro 10S.

Selon revoelectrix elles sont différentes du 10s xp. Et ayant arrêté leur production.

Je suis donc à la recherche.

Si vous en avez à revendre ou si vous savez où je peux m'en procurer.

Merci.
j-p
Pilote Confirmé
Pilote Confirmé
Messages : 196
Inscription : 13 mars 2006, 20:34
Fréquence : ma fréquence
Localisation : VERSAILLES

Re: Plaquette équilibrage Cell pro 10S

Message non lu par j-p »

Bonjour,

Les Adapters pour 10 S et 10 XP sont les mêmes

http://www.usastore.revolectrix.com/Pro ... pro-10XP_2

Alternately, on battery packs larger than 6s that implement the wiring scheme used on Thunder Power packs, you may use two adapters (PN:CP10S-TP/PQ6S) from REVOLECTRIX to charge one pack. One adapter must be plugged into channel one on the Cellpro 10s/10XP charger, while the second adapter must be plugged into channel two. Each of the two balancing tap connectors on the pack will then plug into the separate REVOLECTRIX adapters based on the number of series cells in the pack. Example: You have a 10s Thunder Power pack wired as (2) 5s packs in series. The balancing tap connector from the first 5s pack will plug into the 5s port on the adapter and channel one on the CP10s/10XP. The balancing tap from the second 5s series pack will plug into the 5s port on the second adapter on channel two of the CP10s/10XP. In this example, the second pigtail coming off of each of the CP10S-TP/PQ6S adapters does not get connected to anything. This second pigtail, labeled "Connect for 6s Only" is required only when a single, 6s pack is connected to the Cellpro 10s/10XP charger.
nonoleptitrobot
Champion de France 2011 Nat B
Messages : 191
Inscription : 08 nov. 2007, 13:36
Avion : PEGASE II
Moteur : OS 61RF
Hélice : ?x?
Emetteur : FF9
Récepteur : futaba
Servos : Futaba
Fréquence : 41.000
licence : 0801314
Localisation : Rennes

Re: Plaquette équilibrage Cell pro 10S

Message non lu par nonoleptitrobot »

Merci pour la réponse,

Mais j'avais oublié de préciser qu'il me fallait une plaquette en JST-XH.

Et sur le site revoelectrix, ils n'ont que du TP.
nonoleptitrobot
Champion de France 2011 Nat B
Messages : 191
Inscription : 08 nov. 2007, 13:36
Avion : PEGASE II
Moteur : OS 61RF
Hélice : ?x?
Emetteur : FF9
Récepteur : futaba
Servos : Futaba
Fréquence : 41.000
licence : 0801314
Localisation : Rennes

Re: Plaquette équilibrage Cell pro 10S

Message non lu par nonoleptitrobot »

Pour ceux que cela intéresse,

Vous pourrez en trouver ici :

http://www.myhelis.com/Cellpro-10s-Char ... apter.html


A+
Répondre