Bonjour à tous,
Je recherche une plaquette d'équilibrage pour Cell Pro 10S.
Selon revoelectrix elles sont différentes du 10s xp. Et ayant arrêté leur production.
Je suis donc à la recherche.
Si vous en avez à revendre ou si vous savez où je peux m'en procurer.
Merci.
Plaquette équilibrage Cell pro 10S
-
- Champion de France 2011 Nat B
- Messages : 191
- Inscription : 08 nov. 2007, 13:36
- Avion : PEGASE II
- Moteur : OS 61RF
- Hélice : ?x?
- Emetteur : FF9
- Récepteur : futaba
- Servos : Futaba
- Fréquence : 41.000
- licence : 0801314
- Localisation : Rennes
-
- Pilote Confirmé
- Messages : 196
- Inscription : 13 mars 2006, 20:34
- Fréquence : ma fréquence
- Localisation : VERSAILLES
Re: Plaquette équilibrage Cell pro 10S
Bonjour,
Les Adapters pour 10 S et 10 XP sont les mêmes
http://www.usastore.revolectrix.com/Pro ... pro-10XP_2
Alternately, on battery packs larger than 6s that implement the wiring scheme used on Thunder Power packs, you may use two adapters (PN:CP10S-TP/PQ6S) from REVOLECTRIX to charge one pack. One adapter must be plugged into channel one on the Cellpro 10s/10XP charger, while the second adapter must be plugged into channel two. Each of the two balancing tap connectors on the pack will then plug into the separate REVOLECTRIX adapters based on the number of series cells in the pack. Example: You have a 10s Thunder Power pack wired as (2) 5s packs in series. The balancing tap connector from the first 5s pack will plug into the 5s port on the adapter and channel one on the CP10s/10XP. The balancing tap from the second 5s series pack will plug into the 5s port on the second adapter on channel two of the CP10s/10XP. In this example, the second pigtail coming off of each of the CP10S-TP/PQ6S adapters does not get connected to anything. This second pigtail, labeled "Connect for 6s Only" is required only when a single, 6s pack is connected to the Cellpro 10s/10XP charger.
Les Adapters pour 10 S et 10 XP sont les mêmes
http://www.usastore.revolectrix.com/Pro ... pro-10XP_2
Alternately, on battery packs larger than 6s that implement the wiring scheme used on Thunder Power packs, you may use two adapters (PN:CP10S-TP/PQ6S) from REVOLECTRIX to charge one pack. One adapter must be plugged into channel one on the Cellpro 10s/10XP charger, while the second adapter must be plugged into channel two. Each of the two balancing tap connectors on the pack will then plug into the separate REVOLECTRIX adapters based on the number of series cells in the pack. Example: You have a 10s Thunder Power pack wired as (2) 5s packs in series. The balancing tap connector from the first 5s pack will plug into the 5s port on the adapter and channel one on the CP10s/10XP. The balancing tap from the second 5s series pack will plug into the 5s port on the second adapter on channel two of the CP10s/10XP. In this example, the second pigtail coming off of each of the CP10S-TP/PQ6S adapters does not get connected to anything. This second pigtail, labeled "Connect for 6s Only" is required only when a single, 6s pack is connected to the Cellpro 10s/10XP charger.
-
- Champion de France 2011 Nat B
- Messages : 191
- Inscription : 08 nov. 2007, 13:36
- Avion : PEGASE II
- Moteur : OS 61RF
- Hélice : ?x?
- Emetteur : FF9
- Récepteur : futaba
- Servos : Futaba
- Fréquence : 41.000
- licence : 0801314
- Localisation : Rennes
Re: Plaquette équilibrage Cell pro 10S
Merci pour la réponse,
Mais j'avais oublié de préciser qu'il me fallait une plaquette en JST-XH.
Et sur le site revoelectrix, ils n'ont que du TP.
Mais j'avais oublié de préciser qu'il me fallait une plaquette en JST-XH.
Et sur le site revoelectrix, ils n'ont que du TP.
-
- Champion de France 2011 Nat B
- Messages : 191
- Inscription : 08 nov. 2007, 13:36
- Avion : PEGASE II
- Moteur : OS 61RF
- Hélice : ?x?
- Emetteur : FF9
- Récepteur : futaba
- Servos : Futaba
- Fréquence : 41.000
- licence : 0801314
- Localisation : Rennes
Re: Plaquette équilibrage Cell pro 10S
Pour ceux que cela intéresse,
Vous pourrez en trouver ici :
http://www.myhelis.com/Cellpro-10s-Char ... apter.html
A+
Vous pourrez en trouver ici :
http://www.myhelis.com/Cellpro-10s-Char ... apter.html
A+